If you have a fire or water emergency, please call us now at (512) 318-2200

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

How Professional Mold Removal is Done

8/29/2017 (Permalink)

How Professional Mold Removal is Done

Mold growth behind walls is as a result of damp conditions around a particular space. Mold in home and commercial mold damage may be caused by leaky roofs and pipes that are not repaired in time. Hence, they create damp conditions that encourage mold growth. To prevent mold damage, mold in home, and commercial mold damage, the fungus must be removed before spreading extensively and causing permanent destruction.

Mold growth behind wall is very common, and the level of contamination varies. Therefore, different methods are applied to deal with mold growth behind wall. Effective mold removal of mold in home and commercial mold damage can be done only by a certified mold restoration company.

Why Mold Removal is Necessary

Mold removal is required for the following reasons:

a) Mildew Produces a Smelly Odor

A house that smells clean and fresh is attractive and pleasant to any person who visits it. However, mold growth, especially in a closed space, produces a smelly odor that infuses the whole environment. This smelly odor might not be tolerable to you as it may even cause embarrassment in case you host visitors.

b) Mold may Cause Structural Damage

Mold growth behind wall and on other surfaces may cause structural damage. If mitigation is not done in time, mold damage and dry rot may infuse the structural core of the building, causing extensive damage. Structural damage may render a building inhabitable and may even cause the building to be torn down, which may result in heavy financial losses. Therefore, to prevent this problem, remediation must be done in time.

In case you already have it growing in your house, you can procure the services of a restoration company to get rid of the mold.

Professional Mold Removal

The following are the steps followed by a restoration company when doing mildew remediation:

a) Access the Source of the Moisture

Mold growth and its spread are caused by moisture. Before the mitigation of the spread of mold, the restoration company starts by finding the source of the moisture that is responsible for the growth and spread of the fungus such as leaking plumbing lines. This source is then turned off to prevent any subsequent growth of the mold growth.

b) Calculate the Extent of the Mold Damage

You cannot treat what you don’t understand and, therefore, the professionals handling the mitigation process have to calculate the extent of the mildew damage. More often than not, the extent of the damage may be beyond what can be seen on the surface. By finding out the extent of the contamination, the professionals will know how to go about the restoration process.

c) Create a Remediation Plan

After finding out the extent of the damage, the professionals then create a remediation plan of how they can go about the mitigation. There are different kinds of mold, including dry rot and black mold. These mold types are documented and the remediation plan for each of them, including the resources and manpower to be used, is created.

For example, black mold involves a lot of patience and investment in protective gear. This is because black mold is a relatively more extensive than other types of mold. Dry rot, on the other hand, affects wooden surfaces mainly. Therefore, the method used to restore a surface affected by dry rot would be different from the method of restoring surfaces affected by black mold.

d) Remediate the Contaminated Surfaces to Prevent Mold Damage

The remediation of the contaminated surfaces is then done. This should be done carefully to avoid exposure to both the occupiers of the building and to the person cleaning up the mold. The affected material should be removed and the source of the moisture suppressed.

e) Deodorization

After the fungus has been removed, deodorization is done. Deodorization is the removal of the smelly odor that is as a result of the growth of the mold. Also, deodorization is done to ensure that no fibers are left floating around. Visit http://www.SERVPROhydeparkcentralaustin.com for more information on mold.

Other News

View Recent Posts