Effective Methods for Removing Water From Basements

7/21/2018 (Permalink)

Flood Water Damage

During times of heavy rainfall in Austin, TX, basements may accumulate up to two feet or more of rainwater. Flood water can take days to remove from a basement without the necessary help and equipment. There are a few methods to effectively remove hundreds of gallons of water from your building.

Heavy Water Removal

Once the ground has become saturated, rainwater must find other areas to escape, whether that is to city drainage systems, ditches or basements. There are several reasons that you might not be able to prevent excess water from entering a building:

• Property is located on a floodplain
• Basement wall or foundation has poor construction
• Damage has occurred to drainage pipes
• Blockage or overflow occurs in city’s main drains
• Drainage equipment or pump is not running

If you have a heavily flooded basement every time there are storms in your area, you may need to keep a trash pump handy, which pumps out hundreds of gallons of water per minute. This would give you more time to focus on cleaning up any damage that may have occurred.

Long-Term Care

Although a couple of inches of water might not be as difficult to pump out, it can still leave the building smelling of mildew or cause mold to form over time. If this is the case, you may want to keep a sump pump at the lowest point of your basement.

A sump pump may be capable of pumping out excess water from your basement as a preventative measure and can sit idly for months without use. To make sure it stays working, you may need to check on it periodically.

If you are the owner of a property in Austin, TX, you may not have the time or equipment for dealing with this type of devastation. With the help of a professional cleanup crew, you may be able to quickly recover from a flood and get back on your feet.

For more on Austin Click here.